Flex Grab Rail 30cm Adhesive Mount (Modular)

by Etac Sweden

CASH on Delivery: No Extra Charge | Orders above ₹999 Check PINCode

SHIPPING: Prepaid Orders

    Free within India. Delivered in 5-8 days.
    ₹ 200 Save 2-3 days | Check PINCode for Express Delivery

CASH on Delivery: No Extra Charge | Orders above ₹999 Check PINCode

SHIPPING: Prepaid Orders

    Free within India. Delivered in 5-8 days.
    ₹ 200 Save 2-3 days | Check PINCode for Express Delivery

CASH on Delivery: No Extra Charge | Orders above ₹999 Check PINCode

SHIPPING: Prepaid Orders

    Free within India. Delivered in 5-8 days.
    ₹ 200 Save 2-3 days | Check PINCode for Express Delivery

CASH on Delivery: No Extra Charge | Orders above ₹999 Check PINCode

SHIPPING: Prepaid Orders

    Free within India. Delivered in 5-8 days.
    ₹ 300 Save 2-3 days | Check PINCode for Express Delivery

5 in stock

Pack


    1. Ideal as: Essential support and precautionary aid against falls and accidents in wet zones, slippery surfaces, bathroom and stairs or slopes for elderly adults or differently abled persons with limited mobility, weak footing or poor balance as a result of arthritis, obesity, muscular atrophy or weak muscles, Paraplegia/Quadriplegia, post-surgery rehabilitation, cerebral palsy, Parkinson’s disease and other issues
    2. Useful for those with low vision as a guiding aid as well as those moving in wheelchairs as an additional hold in key turning points around the house
    3. Easy to install and remove from any location with specialised adhesive mounting in partnership with Nie Wieder Bohren of Germany
    4. The high-quality wide ergonomic grip does not let the hand slip when wet, unlike stainless steel bars. Comfortable to hold even in cold weather
    5. Balances the body and reduces stress by spreading the weight (up to 100 kgs) between arms and legs
    6. Adapts to multiple zones easily without need for drilling.
    7. Can be expanded to increase length and angles of support with Etac Flex Extensions.
      Also available in screw mount version for greater weight bearing capacity (up to 120 kgs)
    8. Your purchase is protected by a 5 Year Warranty. Hey Zindagi is an Authorised Distributor for Etac products in India
    1. Brand: Etac Sweden
    2. Variants: 4 (Colours: White, Grey | Types: Base, Extension)
    3. Item Code: ETFGB3
    4. Usage/Application: As a supporting aid during movement to enhance safety
    5. Warranty/Guarantee: Replaceable against any material quality or manufacturing defects within 5 years of the date of purchase except if damaged due to excessive force or improper use
    6. Returns & Refunds: Only in case of identified manufacturing defects or unused item returned in original packaging without any damage - request should be raised within 3 days from delivery. Please read through our Return Policy.
    1. Shipping & Delivery:
      VARIANT SHIPPING COST TIME TO SHIP (Working Days)
      Metros Rest
      Base, Extension  ₹ 100 5-7 7-10
      Base, Extension
       ₹ 200 3-5 5-7
      Base + Extension
       ₹ 150 5-7 7-10
      Base + Extension
       ₹ 300 3-5 5-7
    2. Payment Options: Credit Cards, Debit Cards, Internet Banking (RTGS) and Prepaid Wallets. We also offer Payments via Direct PayTM Transfers & Banker's Cheques too. To know more, click here


HOW IT WORKS?

THE CONSTRUCT

  • Polypropylene: Made of high quality slip-safe soft polypropylene. It has a weight bearing capacity up to 100 kgs. The material is resistant to corrosion over prolonged use. Also it is easy to maintain by simple cleaning (ideally with a disinfectant liquid for optimum hygiene) compared with rubbing or polishing steel/other materials which can be a tedious affair. Being plastic, it is not affected by the temperature variations and is comfortable to hold even during winters
  • Design: The advanced design of the grab rails with a triangular shape makes it easier to hold and provides stable grip even when the hands are wet. The thumb support secures additional grip especially helpful for seniors
  • Positioning options: Can be mounted in different positions at angles between –90o to +90o as per the user’s needs. The additional handle can be mounted at angles of 22.5o between 0 and 90o. Etac Flex can be extended by an unlimited number of additional handles
  • Multiple Fixtures: Straight grab rails work across multiple zones. Angled design is ideal for additional support while rising up or getting seated

Flex Grab Rail/Extension 30cm Adhesive Mount ( ETFGE31A, ETFGE32A) by Etac Sweden


HOW TO INSTALL

  • Identify the point of installation on the wall as per the user’s requirement
    • Height, width and distance of hold play a critical role while installing a grab rail
    • A simple rule of the thumb is - the user must not need to lean over or stretch out while putting weight on the rail, it should ideally be vertically close for an upward/downward motion. If used as a standing aid while bathing working, it should be accessible in a 10 degrees to 30 degrees zone (downward angle) with the arm stretched straight
    • Ensure that the wall has sufficient load bearing capacity (100 kgs):
        • Often the tiles/cement simply gives way and the grab bar falls off when the body weight is applied. This is a result of a weak wall and must be protected against prior to installation
        • Kindly get a professional plumber to install this unit and reinforce the material if necessary
        • Inspect the surface to be sure it is completely flat at all fastening points
      • Cleaning prior to mounting:
          • Use a sanding sponge with sandpaper surface (80). Clean the mounting surface using the sponge and a detergent (PH 5-9) suitable for the surface. Ensure that the surface is free of limestone residues and dirt
          • Wipe off and dry the surface
          • Wash the surface with the wet wipe supplied to remove any residues from the detergent
          • Wipe the surface with a clean, dry, lint-free cloth
          • Wait until the surface is completely dry and has had time to adapt to room temperature (ideally around 15 minutes)
            • Ensure that the mounting surface is completely clean. If required, other cleaning methods may be used to get rid of residues and dirt
          • Mounting
              • Place the glue plate(s) in the handle with the protective tape outwards
              • Remove the protective tape
              • Press the glue plate(s) into place against the wall where the handle is to be positioned
              • Carefully remove the handle(s)
              • Press the glue plates into place to ensure that the tape adheres securely to the wall
              • Insert the tube of glue into the large hole and squeeze glue in until you see glue coming out of the smaller hole (Note: Do not press on the glue plate after it has been filled with glue)
              • Wipe off any excess glue
              • Screw the handle(s) into place using the Allen key supplied. Use the longer screws for the common fixing point(s) of Extensions
              • Indicate date and time when the product is ready for use on the accompanying installation tag and hang it on the product
            • Removing glue
                • Twist the glue plate off the wall using adjustable pliers
                • Scrape off any glue residues with a glass scraper or wash off using silicone remover

              REMEMBER

              • Ensure that the surface is completely free of limestone residues and dirt. The adhesive effect of the glue cannot be guaranteed if the mounting surface has not been fully cleaned.
              • The alcohol cleaning cloth should only be opened it directly before using
              • Do not glue the product onto concrete, plaster, wallpaper, veneer or any other covering
              • Do not use any other adhesive than provided with the product
              • Do not use a screwdriver for securing the handles in position. Use the Allen key provided
              • Do not expose the product to any loads or moisture for a period of 24 hours after mounting for allowing the glue time to harden

              Our Take


              • Etac is known globally for its high design standards that meet functionality as close to perfection as it can get
              • Apart from the unique design of the grip and material finish that reduces chances of the hand slipping, the Adhesive Mount possibility is truly a great choice. It safeguards tiles from additional damage with a DIY application approach. 
              • Nothing like this product is available in the Indian market yet.

              - Sumit

              Hey Zindagi Review

               

              USEFULNESS 5.0
              UNIQUENESS 5.0
              QUALITY 5.0

              Overall : 5.0

              All ratings on a scale of 1 to 5

               


              be our
              community's
              VOICE

              This product has not received any reviews yet.

              Own one already? Do share your comments and suggestions about this product in the Review Section below. Help the Hey Zindagi Community to make a better buying decision.


              SPECIFICATIONS

              PRODUCT DETAILS

              Dimensions
              Whole Length: 35.5 cm | Inner Length (Holding area) 22 cm | Handle distance from wall (gap): 6 cm | Whole height: 8 cm | Handle Thickness: 11 cm
              Weight/Volume 0.35 kg per unit
              Technical Material: Polypropylene
              In the Package 1 Flex grab rail/ Extension 30 cm Adhesive Mount [Product Code: 81707210 / 81706410 / 81706210], Installation Manual
              Developed In England (by Gordon Ellis)
              Country of Origin England (by Gordon Ellis)
              Certifications/Awards CE Certifications for the European Market. Etac is a Red Dot Design, Good Design and Excellent Swedish Design award winner over the last 40 years

              ADDITIONAL INFORMATION

              Usage/Application As a support while sitting, standing and shifting in bathroom and other key zones within the house
              Care & Maintenance Clean/disinfect the product using a standard non-abrasive cleaning agent (with a pH between 5 and 9), or with a 70% disinfectant solution. Rinse and dry. Can be safely cleaned in a cabinet washer-disinfector at 85oC for 3 minutes
              Storage/Do's & Don'ts Do not expose to excessive heat or sunlight
              Warranty & Guarantee In case of manufacturing defects upto a period of 5 years (except for wear and tear of scrub cloth)
              Shipping Mode
              Air/Express: Yes        Surface: Yes
              Attachments Download the Etac Flex grab rail 30 cm Adhesive Mount Installation Manual and Etac Warranty Document